SPX Superpower Regulator, maximum performance and fixed or variable Vout
SPX with variable output is shipped with 30V out. Add a ¼W resistor between the two holes near the pins to change to any Vout down to 5V. Or you can order with a standard fixed output voltage as a plug-in LM78xx replacement!
Output variable with a single resistor, 5V to 30V
Positive or negative output available
3A output current
World's lowest output impedance
Drop out <1V at 2A (positive output), <2V (negative output)
120dB ripple rejection, DC to >50kHz
<1µV/Vout RMS noise, 20Hz-20kHz
1µsec recovery time for 250mA current step
Fits TO-220 footprint and heat sink attachment
Insulated output transistor-- no thermal pad needed!