Innovative Circuits

Specifications (preliminary*)

Superpower Standard

Parameter	Conditions	Value	Units
Input voltage maximum		60	V
Output voltage SP78, SP37	Standard values (1*)	3.3, 5, 7.5, 9, 10, 12, 15, 18, 24, 30	V
Output voltage SP79	Standard values (1*)	-5, -7.5, -9, -10, -12, -15, -18, -24, -30	V
Output Noise (typ)	RMS 20Hz – 20KHz	2 to 3	PPM of Vout
Line Rejection (typ)	60Hz	110	dB
Maximum continuous current	typical, within power dissipation limit	700	mA
Maximum current	<10mV output shift typical	200	mA
Maximum power dissipation	no heat sink sufficient heat sink	1 >50	W
Drop–out voltage	Load Current 50mA 250mA 700mA	0.5 1 2	V
Output Impedance	20Hz – 2KHz 5KHz 20KHz	10 50 150	mΩ

*1 Other values available, contact us.

Superpower High Voltage

Input voltage maximum	350V
Output voltage	As required, enter value on order page
Output Noise	< 5ppm of Vout, 20Hz - 20KHz
Line Rejection	> 100dB at 60Hz
Maximum transient current	700mA typical at limit threshold
Maximum continuous current	500mA typical, within power dissipation limit
Maximum power dissipation	1W with no heat sink, >50W with sufficient heat sink.

*Specifications subject to change without notice.

Pin Diagrams

Superpower High Voltage

The high voltage Superpower is carefully designed to isolate low and high voltage sections. External connections are made by soldering wire into 0.04 inch diameter vias (holes). Three TO-220 power devices can be attached to a heat sink for higher power dissipation. Contact us to discuss custom options.

Click here to view the above diagram in mm.

Superpower Standard

ANNOUNCING!

Belleson® has introduced a small form factor, high output current Superpower™ regulator. The new SPJ78 and SPJ17 devices are available with Vout of +3.3V, +5V and +6.25V, at current to 2 amps. Order the standard 3.3V or 5V positive Superpower and you will get this new part with the same low noise, great dynamics, amazing line and load regulation with 4 times more current and a size that fits your 7805 TO-220 socket!

©2010 Belleson®